20
Important Notes on Handling and Use
This machine is a precision device. To ensure the full performance of this machine, be sure to
observe the following important points. Failure to observe these points may not only result in
loss of performance but may also cause malfunction or breakdown.
This machine is a precision device.
Handle carefully, and never subject the machine to impacts or excessive force.
Carefully clean away milling waste.
Use within the range of specifications.
Never attempt to move the spindle unit or rotary axis by hand with undue force.
Never needlessly touch anywhere inside the machine except for locations specified in this manual.
Install in a suitable location.
Install in a location that meets the specified conditions for temperature, relative humidity, and the like.
Install in a quiet, stable location offering good operating conditions.
Never install outside.
Never install in an environment where silicone substances (oil, grease, spray, etc.) are present. Doing so
may cause poor switch contact.
This machine becomes hot.
Never cover the ventilation holes with cloth, tape, or anything else.
Install in a well-ventilated location.
This machine is a dedicated cutting machine for glass ceramics, composite resin.
Never cut any material other than glass ceramics, composite resin.
