Specifications
3. Appendix
3. Appendix
57
Specifications
DWX-4W
Millable material*
Glass ceramics, Composite resin
Pin type
Width × depth × height: max. 40 × 20 × 20 mm
(1.5 × 0.8 × 0.8 in.)
Operating speed
XYZ axis: 6 to 1800 mm/min. (0.24 to 70.9 in./min.)
Spindle speed
15,000 to 60,000 rpm
Rotary axis travel angle
A: ±360°
Number of milling burs
housed
4
Attachable milling bur
Shank diameter: 3 mm, dedicated milling bur
Compatible
compressed air
0.6 to 0.8 MPa
Interface
USB (compliant with Universal Serial Bus Specification Revision 1.1)
Control command set
RML-1, NC code
Power requirements
AC 100 to 240 V ± 10%, 50/60 Hz (overvoltage category II, IEC 60664-1), 1.9 A
Power consumption
Approx. 200 W
Operating noise
During operation: 70 dB (A) or less (when not cutting), during standby:
48 dB (A) or less
External dimensions
Width x depth x height: 480 × 538 × 599 mm (18.9 × 21.2 × 23.6 in.)
Weight
53 kg (117 lb.)
Installation
environment
Indoor use at altitudes up to 2000 m
Temperature: 5 to 28°C (41 to 82°F), Humidity: 35 to 80% (non-condensing)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage: 1440 V
Long-term temporary overvoltage: 490 V
Included items
Power cord, USB cable, manuals, software CD, automatic correction jig,
hexagonal screwdriver, hexagonal wrench, etc.
* Even when made from the described materials, some workpieces cannot be milled due to specifications or
physical properties. For more information, contact your authorized Roland DG Corporation dealer.
System Requirements for USB Connection
Computer
Model preinstalled with the 32- or 64-bit edition of Windows 7, 8.1 or 10 an
upgraded computer originally preinstalled with Windows Vista or later
USB cable
Use the included USB cable.