Installation
37
2. Installation and Setup
2. Installation and Setup
Adjust the air pressure.
Pull up on the upper knob (the air pressure adjustment knob).
Slowly turn the upper knob.
Adjust until the meter reads between 0.6 and 0.8 MPa.
Push down on the upper knob.
Prepare a fluid receptacle.
Use the drain hoses (included) or a tray.
WARNING
Turn the air pressure adjustment knob slowly and carefully.
Otherwise, the machine may move suddenly, posing a risk of injury.
Turn the drain hose entirely
when attaching it.
Drain hose
Important
Be sure to configure the regulator to 0.8 MPa
or lower. Anything higher may result in a
malfunction.
Loosen
(Increase the
pressure.)
Tighten
(Decrease the
pressure.)
Upper knob