Roland DP90e, Owner'S Manual

Page: 39 / 68

& &
Convenient Functions
Making the Power Automatically
Turn Off After a Time (Auto Off)
With the factory settings, the unit’s power will automatically be
switched off 30 minutes after you stop playing or operating the
unit.
If you don’t need the power to turn off automatically, set “Auto Off”
to the “OFF” setting as described below.
1.
While holding down the [Key Touch] button, press the
[Transpose] button .
2.
Use the [ ] [ ] (Slow/Fast) buttons to select “Auto
Off .”
3.
Use the [–] [+] buttons to change the setting .
Value Explanation
OFF The power will not turn off automatically.
10
The power will automatically turn off if no
operation is performed for 10 minutes.
30 (default)
The power will automatically turn off if no
operation is performed for 30 minutes.
240
The power will automatically turn off if no opera-
tion is performed for 240 minutes (4 hours).
* This setting is automatically stored in the unit.
4.
Press the [Key Touch] button or the [Transpose] button to
finish the procedure .
NOTE
When turning the unit’s power back on after it has been shut
down due to the Auto Off function, always make sure to allow
at least five seconds to pass after the power has been shut off
before you turn the power back on. If you turn it back on too
rapidly, the Auto Off function will not have had enough time to
reset itself, and you may not be able to turn on the power in the
normal way.
Retaining the Settings Even After
Power-off (Memory Backup)
The settings of the unit will return to their factory-set state when
you turn off the power. However, you can store the settings so that
they will be retained even after the power is turned off.
This is called the “memory backup” function.
Parameters Stored in Memory Backup Page
Ambience (on/off, depth) p. 18
Brilliance (on/off, depth) p. 18
Split Point p. 17
Twin Piano mode p. 20
Key Touch (on/off, value) p. 19
Damper Resonance p. 46
String Resonance p. 47
Key Off Resonance p. 47
Dynamic Harmonic p. 47
Cabinet Resonance p. 47
Parameters Stored in Memory Backup Page
Soundboard Behavior p. 47
Note Volume p. 47
Note Character p. 47
Master Tuning p. 46
Temperament p. 46
Temperament Key p. 46
Stretch Tuning p. 47
Volume Limit p. 50
Dual Balance p. 46
Transpose Mode p. 47
Headphones 3D Ambience p. 46
Damper Pedal Part p. 48
MIDI Transmit Channel p. 48
Visual Control Channel p. 49
1.
While holding down the [Key Touch] button, press the
[Transpose] button .
2.
Use the [ ] [ ] (Slow/Fast) buttons to select “Backup .”
3.
Press the [Song] button .
A screen will appear, allowing you to execute the backup.
4.
Press the [ ] (Fast) button to select “Y .”
Memory backup will begin.
If you decide to cancel without executing, press the [
] (Slow)
button to select “N.”
When the memory backup has been completed, the screen of step
2 will appear.
NOTE
Never turn off the power while the screen indicates “Working...”
5.
Press the [Key Touch] button or the [Transpose] button to
finish the procedure .
Restoring the Factory Settings
(Factory Reset)
Settings that you’ve stored using the Memory Backup function (p. 39)
can be returned to their factory-set state. This is called the “factory
reset” function.
NOTE
When you execute “Factory Reset,” all stored settings will be
erased and returned to the factory settings.
MEMO
This function will not erase the songs from the internal memory
or the USB flash drive (sold separately).
If you want to erase the internal memory or the USB flash drive,
“Initializing the Memory (Format Media)” (p. 41).
1.
While holding down the [Key Touch] button, press the
[Transpose] button .
39
O
per
ation G
uide
Panel Descriptions
Bef
or
e
You P
la
y
Per
forming
Pr
ac
ticing
Con
venien
t F
unc
tions
A
ppendix
Func
tion M
ode