Roland DP90e, Owner'S Manual

Page: 49 / 68

Various Settings (Function Mode)
Indication Value Explanation
USB Drv
Changing the USB Driver Settings (USB Driver)
Normally, you don’t need to install a driver in order to connect the unit to your computer. However, if some problem occurs, or if
the performance is poor, using the Roland original driver may solve the problem.
In this case, set the unit’s “USB Driver” setting to “ORG,” and then install the driver in your computer.
After changing this setting, you need to turn off the unit, then turn it back on again.
MEMO
This setting is automatically saved in the unit.
For details on downloading and installing the Roland original driver, refer to the Roland website.
Roland website:
http://www.roland.com/
GEN
Choose this if you want to use the generic USB driver that was included with your computer. Normally, you should use this mode.
ORG
Choose this if you want to use a USB driver downloaded from the Roland website.
USB Mode
Changing the USB flash drive Setting (USB Memory Mode)
In some cases, when USB flash drive is connected to the USB memory port, it may take longer for data to be loaded, or data may fail to be loaded
successfully. If this occurs, you may be able to solve the problem by changing the USB flash drive setting.
When the unit left the factory, this was set to “2” Normally, there is no need to make this setting.
After changing this setting, you need to turn off the unit, then turn it back on again.
MEMO
This setting is automatically saved in the unit.
1, 2
VC Mode
Controlling Video Equipment (Visual Control Mode)
Visual Control is a function that lets you control images along with your performance. If you’ve set Visual Control mode to MVC or VLNK, playing the
keyboard of unit will control the images produced by the Visual Control device connected to unit using a USB cable.
OFF Visual Control is off.
MVC MIDI Visual Control mode is selected.
VLNK V-LINK mode is selected.
VC Ch (*1)
Specifying the Visual Control Channel
Here’s how to specify the channel on which messages used to control video will be sent.
1–16 Specifies the MIDI channel used to transmit MIDI messages to the Visual Control device.
What is MIDI Visual Control?
MIDI Visual Control is an internationally-used recommended practice that was added to the MIDI specification so that visual
expression could be linked with musical performance. Video equipment that is compatible with MIDI Visual Control can be
connected to electronic musical instruments via MIDI in order to control video equipment in tandem with a performance.
What is V-LINK?
V-LINK is Roland’s proprietary specification that allows visual expression to be linked with musical performance.
Video equipment that is compatible with V-LINK can be connected to electronic musical instruments, making it easy
to enjoy a variety of visual effects that are linked with the performance.
Connection examples
Connect a USB cable from this unit’s USB port (p. 10) to the USB port of your Visual Control compatible device.
* You’ll need a commercially available USB cable in order to connect this unit to a device that supports Visual Control.
Visual control function chart
Playing the lowest 12 keys of this unit (A0–G#1) will transmit the following MIDI messages.
Visual Control function Transmitted MIDI message Unit’s operation
Switch images
CC 0 (Bank Select): 0–4 Play black keys
Program Change: 1–7 Play white keys
MEMO
(*1) This parameter can be saved by the “Memory Backup” operation (p. 39).
49
O
per
ation G
uide
Panel Descriptions
Bef
or
e
You P
la
y
Per
forming
Pr
ac
ticing
Con
venien
t F
unc
tions
A
ppendix
Func
tion M
ode