Roland CG-8, User Manual

Page: 22 / 132

22
Making the connections
Use the [OUTPUT RGB] connector if you are connecting the CG-8 to a computer display or projector. Use
the [OUTPUT S-VIDEO] connector or [OUTPUT VIDEO] connector if you are connecting the CG-8 to a
television or projector. If desired, connect the included card adaptor to the [OPTION] connector (p. 18).
If you’re using the CG-8’s Sound Control function with an external audio source connected to the [LINE
IN] jacks, connect your audio device (e.g., CD player) to these jacks. For details, refer to
“Using an
external audio input source to control the image (Sound Control function)” (p. 41).
921 * To prevent malfunction or damage, you must minimize the volume of all devices and turn off the power before
connecting other devices.
926a * The volume from the device connected to the [LINE IN] jacks may be diminished if you use a cable with a built-in
resistor to make connections. If so, use a connection cable that does not contain a resistor (e.g., the Roland PCS
series of cables).
fig.connect.e.eps
* For details on the card adaptor, refer to “About the card adaptor” (p. 18).
* You can connect a foot pedal (foot switch or expression pedal) and use it to control the CG-8’s parameters. For
details, refer to
“Using a foot pedal” (p. 44).
Basic connections
Television or projector
CD player, etc.
Foot pedal
(e.g., DP-2)
Card adaptor
Rear panel
LINE IN L/R OPTION AC IN
Analog RGB output (VGA)
S-VIDEO output VIDEO output
to an AC outlet
Power cord
Computer display or projector
CG8_e.book 22 ページ ２００５年４月２０日 水曜日 午後１２時３分