Roland AX-EDGE, Parameter Manual

Page: 58 / 72

MFX/IFX Parameters
58
48 2V PITCH SHIFTER
Shifts the pitch of the original sound. This 2-voice pitch shifter has
two pitch shifters, and can add two pitch shifted sounds to the
original sound.
Pan 1 R
R out
L out
Balance W
Balance W
Balance D
L in
2 Voice
Pitch Shifter
2 Voice
Pitch Shifter
2-Band EQ 2-Band EQ
2-Band EQ 2-Band EQ
Balance D
Level 1
Pan 1 L
Pan 2 L
Pan 2 R
Level 2
R in
Parameter Value Explanation
P1Coarse
(Pitch1 Coarse)
-24–+12 [semi]
Adjusts the pitch of Pitch Shift 1 in
semitone steps.
P1 Fine
(Pitch1 Fine)
-100–+100 [cent]
Adjusts the pitch of Pitch Shift Pitch 1 in
2-cent steps.
P1 Dly Sync
(Pitch1
Delay (sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Tempo”
(p. 8)
P1 Dly Msec
(Pitch1 Delay (msec))
1–1300 [msec]
Adjusts the delay time from the direct
sound until the Pitch Shift 1 sound is
heard.
P1 DlyNote
(Pitch1 Delay (note))
Note
&
“Note” (p. 72)
P1 Feedback
(Pitch1 Feedback)
-98–+98 [%]
Adjusts the proportion of the pitch
shifted sound that is fed back into the
effect.
Negative (-) settings will invert the phase.
P1 Pan
(Pitch1 Pan)
L64–63R Stereo location of the Pitch Shift 1 sound
P1 Level
(Pitch1 Level)
0–127 Volume of the Pitch Shift 1 sound
P2Coarse
(Pitch2 Coarse)
-24–+12 [semi]
Settings of the Pitch Shift 2 sound.
The parameters are the same as for the
Pitch Shift 1 sound.
P2 Fine
(Pitch2 Fine)
-100–+100 [cent]
P2 Dly Sync
(Pitch2
Delay (sync switch))
OFF, ON
P2 Dly Msec
(Pitch2 Delay (msec))
1–1300 [msec]
P2 DlyNote
(Pitch2 Delay (note))
Note
& “Note”
(p. 72)
P2 Feedback
(Pitch2 Feedback)
-98–+98 [%]
P2 Pan
(Pitch2 Pan)
L64–63R
P2 Level
(Pitch2 Level)
0–127
Low Gain -15–+15 [dB]
Amount of boost/cut for the low-
frequency range
High Gain -15–+15 [dB]
Amount of boost/cut for the high-
frequency range
Balance
D100: 0W–D0:
100W
Volume balance between the direct
sound (D) and the pitch shifted sound
(W)
Level 0–127 Output Level
49 OD
0
CHORUS
L in
R in
Overdrive Overdrive Chorus Chorus
L out
R out
Balance W
Balance W
Balance D
Balance D
Parameter Value Explanation
OD Drive
(Overdrive Drive)
0–127
Degree of distortion
Also changes the volume.
OD Pan
(Overdrive Pan)
L64–63R Stereo location of the overdrive sound
Cho PreDly
(Chorus Pre Delay)
0.0–100 [msec]
Adjusts the delay time from the direct
sound until the chorus sound is heard.
Cho Sync
(Chorus Rate
(sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Tempo” (p. 8)
Cho Hz
(Chorus Rate (Hz))
0.05–10.00 [Hz]
Frequency of modulation
Cho Note
(Chorus Rate (note))
Note
&
“Note” (p. 72)
Cho Depth
(Chorus Depth)
0–127 Depth of modulation
Cho Bal
(Chorus Balance)
D100: 0W–D0:
100W
Adjusts the volume balance between the
sound that is sent through the chorus (W)
and the sound that is not sent through
the chorus (D).
Level 0–127 Output Level
50 OD
0
FLANGER
L out
R out
Flanger Flanger
Balance W
Feedback
Balance W
Balance D
Balance D
Overdrive Overdrive
L in
R in
Parameter Value Explanation
OD Drive
(Overdrive Drive)
0–127
Degree of distortion
Also changes the volume.
OD Pan
(Overdrive Pan)
L64–63R Stereo location of the overdrive sound
Flg PreDly
(Flanger Pre Delay)
0.0–100 [msec]
Adjusts the delay time from when the
direct sound begins until the flanger
sound is heard.
Flg Sync
(Flanger Rate
(sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
“Tempo” (p. 8)
Flg Hz
(Flanger Rate (Hz))
0.05–10.00 [Hz]
Frequency of modulation
Flg Note
(Flanger Rate (note))
Note
& “Note”
(p. 72)
Flg Depth
(Flanger Depth)
0–127 Depth of modulation
Flg Fbk
(Flanger Feedback)
-98–+98 [%]
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Flg Bal
(Flanger Balance)
D100: 0W–D0:
100W
Adjusts the volume balance between the
sound that is sent through the flanger
(W) and the sound that is not sent
through the flanger (D).
Level
0–127 Output Level