Front Panel
fig.02-01
1. MIC1/GUITAR Input Jack
Connect a microphone or guitar to this jack.
2. MIC2 Input Jack
Connect a microphone to this jack.
Only dynamic microphones can be used with the MIC1/GUITAR Input Jack
and MIC2 Input Jack. The miniature microphones (condenser microphones)
included with some computers cannot be used.
3. Input Level Peak Indicator
Lights in green when a signal is input from the MIC1/GUITAR Input Jack, the
MIC2 Input Jack, or the rear panel Line Input Jacks. If the input level is excessive,
it lights in red.
4. MIC1/GUITAR Input Volume
This adjusts the input level of the microphone or guitar connected to the
MIC1/GUITAR Input Jack. Rotating the knob counterclockwise will decrease the
input level, and rotating it clockwise will increase the input level. By pressing this
knob, you can switch between microphone input and guitar input.
5. MIC2 Input Volume
This adjusts the input level of the microphone connected to the MIC2 Input Jack.
Rotating the knob counterclockwise will decrease the input level, while rotating it
clockwise will increase the input level.
NOTE
1
2
4
5
3
7
9
13
12
11
10
6
8
Front and Rear Panels
10
Startup.e 15/6/99 18:42 Página 10