Troubleshooting
3.
Click the
MIDI REC
tab, and make sure that the
Cont.
→
Cont.
check box is
checked. If it is not checked, click to check it.
fig.06-06.e
4.
Click
OK
.
Can’t Record Audio
.
Has the Input Mode Appropriate for the Input Source Been
Selected?
If you are recording from
Line Input
, set the
Mic/Guitar Select Button
of the
mixer or VT mixer window of the UA-100 controller to the
Line
position to select
Line Input
.
Similarly, if you are recording from
Microphone Input
, set the
Mic/Guitar Select
Button
to the
Mic/Guitar
or
Mic1+Mic2
position.
For details refer to
UA-100 Controller Help
.
Are the Faders Raised?
In the mixer or VT mixer window of the UA-100 controller, raise the level of the
Main Fader
or
Wave Output Fader
to increase the volume of the signal that you
are recording.
For details refer to
UA-100 Controller Help
.
Has the Wave Source Selector Been Set Correctly?
In the
Mixer
or
VT mixer
function of the
UA-100 Controller
, set the
Wave Source
Selector
to the source that you wish to record. For details refer to
UA-100
Controller Help
.
Cont.
→
Cont. check box
63
Startup.e 15/6/99 18:42 Página 63
