RP208CN User’s and Installer’s Manual Page 7
11. Digit Keys
When programming, key in 0-9 digits.
12. Function Key [*] [#]
When programming, key [*] to enter function mode; and [#] for confirmation.
Function and Operation
Keys and Functions
The Keys can support the following functions:
1. Enter digit(s) for Arming, Disarming, Panic Alarm, Programming etc.
2. Enter user’s function mode.
3. Key [ARM] is for Quick Arming and Code Arming. By pressing it, the
system will be fully armed.
4. Key [STAY] is for Quick Stay Arming and Code Stay Arming. By pressing it
to arm, only part of the zone is armed. Each zone can be set as interior
zone or external zone. When use
[STAY]
for arming, the external zone is
armed while leaves the interior zone disarmed.
5.
Under the disarmed status, press [*] to enter user’s function mode.
Reference to
CHAPTER 1- SUMMARY of USER’S COMMANDS
1. Setting/Changing and Deleting User’s Code
The default Master Code of RP208CN is 1-2-3-4. Unless your alarm company
has already changed it to suit your preference, it’s best to modify this code to
one which is unique and personalized. RP208CN can set 10 of Codes, one is
Master Code and another 9 are User’s Codes. To change the Master Code,
and /or to set up User Coeds, follow the steps. Make sure the system is
disarmed when setting the code. The User’s Codes are only for Arming and
Disarming the system
Functions of the Master Code:
Adding, changing and deleting User’s Code
Setting
Time
Clock
Operating
and
testing
Setting the follow-me numbers
