RP208CN User’s and Installer’s Manual Page 14
18. Zone Features
RP208CN has 8 programmable zones. Each zone can be programmed as
Entry/Exit Delay Zone, Instant (Intrusion) Zone, Panic Zone, Fire Zone, Tamper
Zone, Remote Zone etc .
Entry/Exit Delay Zone:
A delay period was chosen during your system’s
installation to provide suitable time to allow for your entry and exit. Exit Delay
is the max time from pressing the ARM key to exit the zone; Entry Delay is the
max time from entering the zone to DISARM. If the time exceeds the max time
and the detector is triggered again, then the system will alarm at once.
Instant Intrusion Zone:
When it is triggered, the system will alarm instantly.
Panic Zone:
Used for panic button, which is 24-Hours Zone
Fire Zone:
Used for smoke detector and gas detector, which is 24-Hours Zone
Tamper Zone:
Used for connecting with the tamper connector of detector,
which is 24-Hours Zone
Remote Zone:
Used for connecting with remote receiver, which is 24-Hours
Zone
For user’s convenience, all RP208CN zones have been defaulted as following:
Zone 1: Entry/Exit Delay Zone;
Zone 2: Instant (Intrusion) Zone;
Zone 3: Instant (Intrusion) Zone;
Zone 4: Panic Zone;
Zone 5: Fire Zone;
Zone 6: Tamper Zone;
Zone 7: Interior Zone;
Zone 8: Interior Zone;
19. Get Events from Event Logger
You can retrieve events located in the event Logger memory from LCD keypad
(up To 50 events) , including arm, disarm, alarm etc.
Events are presented
from the Last entered to the first Registered.
The affairs serial number use for
2 data (01-50).
Press : [*]+[9]+[MASTER CODE]+[EVENT No.]
The keypad display format:
[MM][DD][HH][MM][2 affairs code][Zone No. or User No.]
