RP208CN User’s and Installer’s Manual Page 13
pushed at anytime, and the police, fire department, or medical assistance is
required. Emergency Alarm is defaulted as silence alarm.
Press 1 and 2 simultaneously, and for at least two seconds, will
activate a Panic Alarm.
Press 4 and 5 simultaneously, and for at least two seconds, will
activate a Fire Alarm.
Press 7 and 8 simultaneously, and for at least two seconds, will
activate a Medical Emergency.
15. Entry and Exit Delays
Your security system must incorporate in and from the premises without
causing inadvertent alarms. A delay period was chosen during your system’s
installation to provide suitable time to allow for your entry and exit. Entry/Exit
Delays can be set by programming, and it’s defaulted as 30 seconds. To
change the delay time, refer to location 11-13 of Chapter 5.
16. 24-Hour Zone
RP208CN can support several kinds of zones. All other forms of protection,
including fire and 24-hour panic alarms (I.e. police, fire, and medical) are
always ready to report alarms and do not need to be armed.
17. Trouble Display
When the keypad sends out three short beep regularly, indicating that the
system exists some troubles. When get rid of the troubles, the system will
restore to normal status and stop beeping. Troubles include Battery Low, AC
power, No Clock, No Communication, No Siren etc. Press [*]+[3] to search on
the LCD. The troubles displayed as follow:
Trouble Table
LCD
Trouble
Battery Low
The Backup Battery Power is low.
AC Power
AC Power is lost.
No Clock
Clock have not been set
No Communication
The Communication is in trouble.
No Siren
The Siren connection is in trouble.
