MK715x1EK1A Hardware Manual
FEXK715x1EK1A_HardManual-01
i
Precautions for the Specification
1) Contents of the Specification are the information at the time of their issuance. The information contained herein
is subject to change without notice.
2) LAPIS Technology has used reasonable care in preparing the information included in the Specification, but
LAPIS Technology does not warrant that such information is error free. LAPIS Technology assumes no liability
whatsoever for any damages incurred by you resulting from errors in or omissions from the information included
herein.
3) The technical information specified herein is intended only to show the typical functions of the Products and
examples of application circuits for the Products. No license, expressly or implied, is granted hereby under any
intellectual property rights or other rights of LAPIS Technology or any third party with respect to the information
contained in this document; therefore LAPIS Technology shall have no responsibility whatsoever for any dispute,
concerning such rights owned by third parties, arising out of the use of such technical information.
4) The Specification contains information related to the LAPIS Technology
’s copyright and technical know-how.
Any use of them other than pertaining to the usage of appropriate products is not permitted. Further, the
Specification, in part or in whole, may not be reprinted or reproduced and disclosed to third parties without prior
consent of LAPIS Technology.
Precautions for the Products
●Precautions for Safety
1) The Products are designed and produced for application in ordinary electronic equipment (AV equipment, OA
equipment, telecommunication equipment, home appliances, amusement equipment, etc.).
2) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please
contact and consult with a LAPIS Technology representative: transportation equipment (i.e. cars, ships, trains),
primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems,
servers, solar cells, and power transmission systems.
3) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment,
nuclear power control systems, and submarine repeaters.
4) The Products are designed for use in a standard environment and not in any special environments.
Application of the Products in a special environment can deteriorate product performance. Accordingly,
verification and confirmation of product performance, prior to use, is recommended if used under the following
conditions:
[a] Use in various types of liquid, including water, oils, chemicals, and organic solvents.
[b] Use outdoors where the Products are exposed to direct sunlight, or in dusty places.
[c] Use in places where the Products are exposed to sea winds or corrosive gases, including Cl
2
, H
2
S, NH
3
,
SO
2
, and NO
2.
[d] Use in places where the products are exposed to static electricity or electromagnetic waves.
[e] Use in environment subject to strong vibration and impact.
[f] Use in proximity to heat-producing components, plastic cords, or other flammable items.
[g] Use involving sealing or coating the Products with resin or other coating materials.
[h] Use of the Products in places subject to dew condensation.
[i]
Use in an environment where the temperature is always low, such as in a freezer.
[j]
Use in an environment where the temperature change of this product increases due to the
influence of the surrounding heat source
(Example:
IH cooking heaters, industrial robots, FA equipment, infrastructure equipment, etc.)
5) The Products might receive the radio wave interference from electronic devices such as Wireless LAN devices,
Bluetooth devices, digital cordless telephone, microwave oven and so on that radiate electromagnetic wave.
6) The Products are not radiation resistant.
7) Verification and confirmation of performance characteristics of Products, after on-board mounting, is advised.
