MK715x1EK1A Hardware Manual
FEXK715x1EK1A_HardManual-01
i i
8) Confirm that operation temperature is within the specified range described in the Specification.
9) Although LAPIS Technology is continuously working to improve product reliability and quality, semiconductors
can break down and malfunction due to various factors. Therefore, if product malfunctions may result in serious
damage, including that to human life, sufficient fail-safe measures must be taken, including the following:
[a] Installation of protection circuits or other protective devices to improve system safety.
[b] Installation of redundant circuits in the case of single-circuit failure
10) Failure induced under deviant condition from what defined in the Specification can not be guaranteed.
11) This product is a specification to radiate the radio wave. It is necessary to acquire the attestation of decided
Radio Law of each region used to use the equipment that radiates the radio wave.
Please inquire about the attestation of Radio Law that this product acquires.
12)
When product safety related problems arises, please immediately inform to LAPIS Technology, and consider
technical counter measure.
●Precautions for Reference Circuits
1) If change is made to the constant of an external circuit, allow a sufficient margin due to variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2) The reference circuit examples, their constants, and other types of information contained herein are applicable
only when the Products are used in accordance with standard methods. Therefore, if mass production is
intended, sufficient consideration to external conditions must be made.
● Precaution for Electrostatic
This product is Electrostatic sensitive product, which may be damaged due to Electrostatic discharge. Please
take proper caution during manufacturing and storing so that voltage exceeding Product maximum rating won't be
applied to the Products. Please take special care under dry condition (Grounding of human body / equipment /
solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control
etc.)
● Precautions for Storage / Transportation
1) Product performance and connector mating may deteriorate if the Products are stored in the following places:
[a] Where the Products are exposed to sea winds or corrosive gases, including Cl
2
, H
2
S, NH
3
, SO
2
and NO
2
.
[b] Where the temperature or humidity exceeds those recommended by LAPIS Technology Temperature: 5°C
to 40°C, Humidity 40% to 60%
[c] Storage in direct sunshine or condensation.
[d] Storage in high Electrostatic.
2) Even under LAPIS Technology recommended storage condition, connector mating, mountability, and heat
resistance of products over 1 year old may be degraded.
3) Store / transport cartons in the correct direction, which is indicated on a carton as a symbol, otherwise bent
leads may occur due to excessive stress applied when dropping of a carton.
● Precaution for Product Label
QR code printed on LAPIS Technology product label is only for internal use, and please do not use at customer
site.
It might contain internal products information that is inconsistent with product information.
● Precaution for Disposition
When disposing Products, please dispose them properly with an industry waste company.
