MK715x1EK1A Hardware Manual
2. Hardware specifications
FEXK715x1EK1A_HardManual-01
7
2.3 LED
4
User
LEDs, 1 Power LED, 2 UART status LEDs are available in this evaluation kit.
2.3.1 User LEDs
4
User
LEDs (green) are connected to GPIO port. The LEDs are active low driven. GPIO port should be in high
drive mode. GPIO and LED can be completely separated by cutting the solder bridge(SB_LED1, SB_LED2,
SB_LED3, SB_LED4). The circuit configuration and port assignment are shown below.
Fig. 2-6 : User LEDs
LED
GPIO Port
LED1
P0.17
LED2
P0.18
LED3
P0.19
LED4
P0.20
Table. 2-3 : LED GPIO port assignment