Maintenance
Replacing a Hot Swappable Hard Drive
101
VENICE S | User Manual | 2906.1345.02 - 02
Rohde & Schwarz GmbH & Co. KG
3.
Install a hard drive in the hard drive carrier.
4.
Press the release button on the front of the hard drive carrier
and open the hard drive carrier handle.
5.
Insert the hard drive carrier into the hard drive slot until the
carrier connects with the backplane.
6.
Close the hard drive carrier handle to lock the hard drive in
place.
Damaged Carrier
Inserting a hard drive carrier and attempting to
lock its handle next to a partially installed carrier
can damage the partially installed carrier's shield
spring and make it unusable.
When installing a hard drive, ensure that the
adjacent drives are fully installed.
Data Loss
When a replacement hot swappable hard drive is
installed and the system is powered on, the hard
drive automatically begins to rebuild. Any data on
the replacement hard drive is immediately lost
after the hard drive is installed.
Make absolutely sure that the replacement
hard drive is blank or contains data that you
wish to have over-written.
Combining SAS and SATA hard drives in the same
RAID volume is not supported.