Administration
Restoring the System
85
VENICE S | User Manual | 2906.1345.02 - 02
Rohde & Schwarz GmbH & Co. KG
7.
Enter the name of the system disk: Type in e.g.
sda
(or in
other cases
sdb
,
sdc
, etc.) and press
[Enter]
.
A further list of possible source images will be detailed on
the screen. If there is only the Rohde & Schwarz recovery
image on the USB flash drive, this one will be listed. If
there are several images, all images will be displayed.
8.
Select the image you want to use for the recovery. Normally,
it provides the serial number of the VENICE S in its name.
To confirm your choice press
[Enter]
.
The system will ask you to confirm your selection and
whether you want to continue.
9.
To start the recovery process type in
y
for ’yes’ and press
[Enter]
.
The program starts the recovery process. Its progress will
be indicated on the screen.
When the system has finished the recovery process, you will be
notified. Then after pressing
[Enter]
, you will be redirected to
the RuS Rescue script once more where you can choose, for
example, ’reboot’ or ’poweroff’ to restart or turn off the system.
The next time the system is started, it will load the restored
operating system.
To abort the process at this point enter
n
for ’no’ and
press
[Enter]
on your keyboard. You will be redirected
to the RuS Rescue script.
After starting the process its termination is no longer
possible.
The recovery process may take some time.
If during the process the screen turns black, press
[Space]
to get it back again.