manualshive.com logo in svg

Rohde & Schwarz TS-PSAM, User Manual

Share
Download
Rohde & Schwarz TS-PSAM User Manual Download Page 30

Software

R&S

®

TS-PSAM

28

User Manual 1142.9878.12 ─ 12

7

 

Software

7.1

 

Driver Software

A LabWindows IVI DMM driver is provided for the DMM functions on the card. All other
functions are controlled using specific extensions of the driver. The driver is part of the
ROHDE & SCHWARZ GTSL software. All the functions of the driver are described fully
in the on-line help and in the LabWindows CVI Function Panels.

During driver installation, the following software modules are installed:

Table 7-1: Driver Installation R&S TS-PSAM

Module

Path

Comment

rspsam.dll

<GTSL directory>\Bin

Driver

rspsam.chm

<GTSL directory>\Bin

Help files

rspsam.fp

<GTSL directory>\Bin

LabWindows CVI Function Panel file, function panels for
CVI development interface

rspsam.sub

<GTSL directory>\Bin

LabWindows CVI attribute file. This file is required by
some „function panels“.

rspsam.lib

<GTSL directory>\Bin

Import Library

rspsam.h

<GTSL directory>\
Include

Header file for the driver

To use the driver, the IVI and VISA libraries from National Instruments are necessary.

7.2

 

Soft Panel

On this topic, see also 

Figure 7-1

.

A soft panel R&S TS-PSAM is provided for the module. The soft panel is based on the
LabWindows CVI driver. It enables the measurement module to be operated interac-
tively. The measurement values are output in digital or graphical format (Multipoint
Measurements).

Soft Panel

Summary of Contents for TS-PSAM



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands