Layout
R&S
®
TS-PSAM
15
User Manual 1142.9878.12 ─ 12
The R&S TS-PDC module must always use the corresponding rear I/O slot for the
main module (e.g. R&S TS-PSAM module).
The R&S TS-PDC module must always be inserted in the corresponding rear I/O slot
of the R&S TS-PSAM module.
If modules are inserted incorrectly (e.g. cPCI/PXI standard modules in the front), both
modules may be damaged irreparably.
Figure 4-3: Arrangement of the connector and LEDs on the R&S TS-PDC module
Table 4-3: Connector for the R&S TS-PDC module
Symbol
Use
X20
Extension (Rear I/O)
4.4
Display Elements of the R&S TS-PDC Module
4.4.1
R&S TS-PDC Version Lower than 2.0 (1157.9804.02)
The actual status of the module is signalized by 8 green LEDs, whereas each LED
indicates the presence of an output voltage.
In fault free operation all 8 LEDs must light up simultaneously.
4.4.2
R&S TS-PDC from Version 2.0 (1157.9804.12)
The actual status of the module is signalized by 10 LEDs.
Display Elements of the R&S TS-PDC Module
