Rohde & Schwarz RTP Getting Started Download

Page: 19 / 83

Preparing for use

R&S

RTP

Getting Started 1337.9946.02 ─ 07

CAUTION!

The product can fall over and cause injury. The top surface is too

small for stacking. Never stack another product on top of the product.

As an alternative, you can mount several products in a rack.

NOTICE!

Overheating can damage the product.

Prevent overheating as follows:
● Keep a minimum distance of 10

cm between the fan openings of the prod-

uct and any object in the vicinity.

● Do not place the product next to heat-generating equipment such as radia-

tors or other products.

4.4.2

Mounting the product in a rack

The instrument can be installed in a rack using a rack adapter kit. The order num-
ber is given in the data sheet. The installation instructions are part of the adapter
kit.

To prepare the rack

1. Observe the requirements and instructions in

"Setting up the product"

on page 7.

NOTICE!

Insufficient airflow can cause overheating and damage the product.

Design and implement an efficient ventilation concept for the rack.

To mount the R&S

RTP in a rack

1. Use an adapter kit that fits the dimensions of the R&S

RTP to prepare the

instrument for rack mounting. For information on the dimensions, see data
sheet.
a) Order the rack adapter kit designed for the R&S

RTP. For the order num-

ber, see data sheet.

Setting up the product

Summary of Contents for RTP




















































































Search results

Summary of Contents for RTP

Reviews:

Related manuals for RTP

Brands by name

Popular brands

Rohde & Schwarz RTP, Getting Started

Search results

Summary of Contents for RTP

Reviews:

Related manuals for RTP

Brands by name

Popular brands