Preparing for use
R&S
®
RTP
25
Getting Started 1337.9946.02 ─ 07
3. Select "Mouse settings".
4.8.2
Connecting an external monitor
You can connect an external monitor or projector to the R&S
RTP. The following
connectors are available:
●
●
Before connecting an external monitor, ensure that the monitor and the R&S
RTP
are connected to a ground contact. Otherwise the instrument can be damaged.
After connecting an additional monitor or projector to the instrument, configure it
for usage. The relevant settings are Windows settings but you can configure the
displays directly in the instrument setup.
1. Check the input type of the monitor or projector. Make sure to select the cor-
rect cable. To use a VGA monitor, you need an active DVI-D to VGA adapter.
2. Open "Menu" > "Settings" > "Display".
3. Select the "Monitors" tab.
4. Select how to display the screen.
5. To access Windows display settings, tap "Additional settings".
The touchscreen of the R&S
RTP has a screen resolution of 1280 x 800 pixel.
Many external monitors have a higher screen resolution. If the screen resolution
of the monitor is set higher than the instrument's resolution, the application win-
dow uses a 1280 x 800 area of the monitor display. For full screen display, adjust
the monitor's screen resolution using "Additional display settings".
Connecting external devices
