Trying Out the Instrument
R&S
®
RTO2000
37
Getting Started 1332.9719.02 ─ 08
8. Tap the "Undo" icon on the toolbar repeatedly until the trigger mode is "Auto" and
the trigger source is "CH1".
9. Press the [Slope] key to toggle the trigger slope.
Watch the waveform and the "Trigger" settings.
4.2
Acquiring Data
Although you are using only one input channel, you can acquire the calibration data
using three different arithmetic methods and display the results in separate waveforms.
1. In the [Horizontal] area, press the [Acquisition] key.
2. In the "Acquisition" tab of the "Horizontal" dialog box, enable all three waveforms
("Wfm1", "Wfm2", "Wfm3").
If you cannot see these settings, enable "Multi waveform" in the lower right corner
of the dialog box.
3. For Wfm1, select the "Mode" =
Sample
and "Wfm Arithmetic" = "Off".
4. For Wfm2, select the "Wfm Arithmetic"
Envelope
. The "Decimation" type is auto-
matically set to
Peak detect
to display the correct envelope waveform.
5. For Wfm3, select the "mode" =
High Res
and the "Wfm Arithmetic" to
Average
.
Acquiring Data
Summary of Contents for R&S RTO2000 Series
Page 1: ...R S RTO2000 Oscilloscope Getting Started Getting Started Version 08 1332971902 P C2...
Page 6: ...Contents R S RTO2000 6 Getting Started 1332 9719 02 08...
Page 34: ...Instrument Tour R S RTO2000 34 Getting Started 1332 9719 02 08 Keys and Controls...
Page 72: ...Trying Out the Instrument R S RTO2000 72 Getting Started 1332 9719 02 08 Saving Data...
