Rohde & Schwarz NRP110TWG, Getting Started

Page: 25 / 57

R&S NRP Power Sensors Tour
R&S
®
NRP Series
25 Getting Started 1419.0170.02 ─ 12
5 R&S NRP Power Sensors Tour
This chapter provides an overview of the available connectors and LEDs of the
power sensor.
In Figure 5-1 , the USB power sensor is shown on the left, the LAN power sensor
is shown on the right.
1
1
2
3
4
4
7
8
5
2
3
HOST
INT
ER
FACE
IN:
3 V
or
5 V
logic
OU
T: min.
2 V
into
50
Ω
max.
5.3
V
TRIG2
I/0
PoE
SM
AR
T SENSOR
TECHNOLOGY
NRP
SM
AR
T SENSOR
TECHNOLOGY
NRP
6
Figure 5-1: R&S NRP series power sensors (example)
1 = RF connector, see Chapter 5.1, "RF Connector" , on page 26
2 = Trigger I/O connector, see Chapter 5.2, "Trigger I/O Connector" , on page 27
3 = Host interface connector, see Chapter 5.3, "Host Interface" , on page 28
4 = Status LED, see Chapter 5.4, "Status LED" , on page 28
5 = LAN connector, see Chapter 5.5, "LAN PoE Interface" , on page 29
6 = LAN reset button, see "LAN reset button" on page 29
7 = Power over Ethernet status LED, see "Power over Ethernet status LED" on page 29
8 = Network status LED, see "Network status LED" on page 29