Preparing for Use
R&S
®
NRP Series
23
Getting Started 1419.0170.02 ─ 12
●
<serial number>
is the individual serial number of the power sensor. The
serial number is printed on the name plate at the rear side of the sensor. It is
part of the device ID printed above the barcode:
ID: 1419.0035K02 - 101441 - Zd
Serial Number
Figure 4-6: Serial number on the name plate
Example:
Serial number of the power sensor: 101441
Default hostname: nrp18sn-101441
Hostname in zero configuration networks, including peer-to-peer networks
The power sensor supports zero configuration networking, used in networks with-
out DHCP server, such as peer-to-peer networks. Thus, you can connect the
power sensor to a network without setting up services such as dynamic host con-
figuration protocol (DHCP) and domain name system (DNS), or configuring the
network settings manually.
For establishing a connection to the power sensor, try the default hostname and
the hostname extended with
.local
as shown in the example below. All commu-
nication for resolving names in the top-level-domain (TLD)
.local
are defined to
be executed using dedicated local services and ports if no other DNS (domain
name server) is available.
Example:
Default hostname:
nrp18sn-101441
Extended hostname:
nrp18sn-101441.local
Connecting to a Controlling Host
