Rohde & Schwarz NRP-Z Series, Getting Started

Page: 30 / 40

Operating Concepts
R&S
®
NRP-Zxx
30 Getting Started 1176.8822.02 ─ 04
1 = Signal source
2 = R&S NRP
‑
Z power sensor
3 = R&S NRP
‑
Z4
4 = USB connector
5 = PC with installed R&S
NRPV
Incorrectly connecting/disconnecting the R&S NRP
‑
Z power sensors may
damage the power sensors or lead to erroneous results.
Ensure that you connect/disconnect your power sensors as described in
Chapter 4.4, "Connecting the R&S NRP
‑
Z Power Sensors" , on page 14 and
Chapter 4.5, "Disconnecting the R&S NRP
‑
Z Power Sensors" , on page 16.
Starting a measurement
1. Connect the power sensor to the PC as shown in Figure 6-1 .
2. On the PC, start the R&S NRPV software.
3. Connect the power sensor to the PC. For a detailed description, see Chap-
ter 5, "Connecting to a PC" , on page 18.
4. If you use the power sensor for the first time with the R&S NRPV software,
activate the sensor using a license key:
a) In the "File" menu, select "File"
> "Licensing".
The "Licensing NRP-Z Power Sensors for NRPV" dialog opens.
b) Select your power sensor.
c) Select "Enter License".
The "License Activation" dialog opens.
d) Enter the license key either manually or with the key code file.
R&S NRPV