Operating Concepts
R&S
®
NRP-Zxx
29
Getting Started 1176.8822.02 ─ 04
6.1.5
Performing a Firmware Update
Use the firmware update program (PureFW) to load new firmware for the power
sensors. It is part of the R&S
NRP Toolkit that is supplied on a CD-ROM together
with the power sensors. For further details, refer to the operating manual.
6.2
R&S
NRPV
The R&S
NRPV enables you to measure power in all available measurement
modes. Also, you can use up to four power sensors simultaneously.
The R&S
NRPV software can be installed on any Windows PC. It is provided on
your documentation CD-ROM and on the Rohde & Schwarz website as a sepa-
rate standalone installation package. To make full use of its functionalities, you
must activate your R&S NRP
‑
Z power sensor with a license key.
Required equipment
●
R&S NRP
‑
Z power sensor
●
R&S
NRP
‑
Z3, R&S
NRP
‑
Z4 or R&S
NRP
‑
Z5
●
Windows PC with installed:
– R&S
NRP Toolkit
– R&S
NRPV (refer to the operating manual of the R&S
NRPV for a descrip-
tion of the installation process)
●
License key (R&S
NRPZ-K1 option) for activating the power measurements
for your R&S NRP
‑
Z power sensor
Setup
Figure 6-1: Setup with an R&S
NRP
‑
Z4 and an R&S
NRPV
R&S
NRPV
