Connecting to a PC
R&S
®
NRP-Zxx
21
Getting Started 1176.8822.02 ─ 04
e) Connect the delivered plug-in power supply to the R&S
NRP
‑
Z3 and to an
AC supply connector (optional).
2. On the PC, start a software application to view the measurement results. See
Chapter 6, "Operating Concepts"
5.3
Using an R&S
NRP
‑
Z5 Sensor Hub
The R&S
NRP
‑
Z5 sensor hub (high-speed USB 2.0) can host up to four R&S
NRP
‑
Z power sensors and provides simultaneous internal and external triggering
of all connected sensors.
Required equipment
●
R&S NRP
‑
Z power sensor
●
R&S
NRP
‑
Z5 sensor hub that provides:
– Power supply
– Through-wired trigger bus
– Trigger input and trigger output via BNC sockets
●
PC with installed R&S
NRP Toolkit, see
Using an R&S
NRP
‑
Z5 Sensor Hub
