manualshive.com logo in svg

Rohde & Schwarz 4091.7009.02, Getting Started

Share
Download
Rohde & Schwarz 4091.7009.02 Getting Started Download Page 48

Software and Firmware Update

R&S

®

 EB510

48

Getting Started 4091.7338.02 ─ 01

Updating the EB510 without front control panel

The EB510 without front control panel cannot be updated with this method.
In order to update the receiver firmware of a EB510 without front control panel,
you will need the Update32 tool. The method of updating by using the
Update32 tool is described in 

​

chapter 4.3, "Receiver Firmware Update for

EB510 without front control panel"

, on page 48.

Remote GUI on Notebook / desktop PC

If you want to install the GUI for use on a notebook or desktop PC, you should
follow the procedure described in 

​

chapter 4.4, "GUI Installation for Remote

Access"

, on page 54.

If the R&S

 

EB510 cannot reboot

Due to the fact that the R&S

 

EB510 also can be updated using the Update32

Tool (see 

​

"Updating the EB510 with front control panel"

 on page 53), there

is a chance that the R&S

 

EB510 cannot reboot. Follow the steps described

in 

​

"If the R&S

 

EB510 cannot reboot"

 on page 54 to deal with this problem.

4.3

Receiver Firmware Update for EB510 without
front control panel

This model requires a different update method which makes use of the LAN inter-
face of the R&S

 

EB510 (X7 on the rear panel). The method uses the "Update32"

tool, which runs under Windows NT, Windows 2000 and Windows XP.

Retrieve Update32

The firmware required for the update can be retrieved from either one of the loca-
tions mentioned at 

​

"CD-ROM and Downloads"

 on page 40.

Click on 

Firmware Update Program

 and 

File Explorer

 will be launched into

the directory 

Update32XP

. The 

Update32

 tool can be installed by clicking on

Setup

. If your browser does not launch 

File Explorer

, you should launch it

 

Receiver Firmware Update for EB510 without front control panel

Summary of Contents for 4091.7009.02






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands