manualshive.com logo in svg

Rohde & Schwarz 4091.7009.02, Getting Started

Share
Download
Rohde & Schwarz 4091.7009.02 Getting Started Download Page 23

Operation

R&S

®

 EB510

23

Getting Started 4091.7338.02 ─ 01

2.3.2.4

Settings – Receiver and Antenna

Before proceeding with the Basic Operation section, it is useful to install a suitable
antenna or signal source into one of the ANT HF1 / HF2 / HF3 antenna connectors
on the rear panel (X10 / X11 / X12).

Check the following settings under the Receiver and Antenna submenu to ensure
the default settings are in place.

1. Press the SETUP key to open the Setup Menu.

2. Select the "Receiver" softkey.

3. The Receiver Configuration dialog box will appear. Check that "RF Mode" =

Normal, "Reference Mode" = Internal. Refer to the R&S

 

EB510 Operating Man-

ual for the detailed description of this dialog box.

4. Press the ESC key to exit the dialog box and return to the Setup Menu.

5. Select the "Antenna" softkey.

6. The Antenna Control dialog box will open.

7. The "Automatic Control" checkbox is checked by default. When it is unchecked,

the antenna settings will be available for manual configuration. The Operating
Manual explains how to do the manual configuration.

8. Press ESC to exit the dialog box and again to get to the top menu.

 

Graphical User Interface (GUI)

Summary of Contents for 4091.7009.02






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands