manualshive.com logo in svg

Rohde & Schwarz 4091.7009.02, Getting Started

Share
Download
Rohde & Schwarz 4091.7009.02 Getting Started Download Page 53

Software and Firmware Update

R&S

®

 EB510

53

Getting Started 4091.7338.02 ─ 01

Completing the update

After the update is completed, close the dialog by clicking on the "OK" button. The
R&S

 

EB510 will restart automatically.

If update procedure fails.

If the update procedure fails, simply switch off the R&S

 

EB510 and restart the

update procedure.

Updating the EB510 with front control panel

The EB510 with front control panel can also be updated using the method
with the Update32 tool. Please take note that this method cannot update the
GUI. This might cause version conflicts between receiver firmware and GUI.
For updating the EB510 with front control panel, use the method described in

​

chapter 4.2, "Receiver Firmware and GUI Update for EB510 with front control
panel"

, on page 40.

Receiver Firmware Update for EB510 without front control panel

Summary of Contents for 4091.7009.02






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands