Product Description
R&S
®
RT-ZD01
8
User Manual 1422.0732.02 ─ 02
1.4
Precautions
Shock hazard caused by high voltages
To avoid electric shock and personal injury, and to prevent damage to the
probe or any other products connected to it, observe the following instruc-
tions:
●
The probe and the measurement instrument must be grounded.
The probe is grounded with the shell of the BNC connector or an auxili-
ary ground connector through the grounding of the measurement instru-
ment.
●
Never use the probe in measurement environments higher than mea-
surement category III.
●
Do not apply effective voltages greater than 1000 V (RMS) between
either input of the probe and earth ground, or between both inputs.
●
Make sure that all accessories comply with measurement category III,
1000 V (RMS).
●
Do not operate the probe without covers.
●
Do not use the probe in wet, damp or explosive atmospheres.
Make sure that the surface of the probe is completely dry before con-
necting the inputs.
●
Avoid exposed circuitry. Do not touch exposed connections and compo-
nents when power is on.
Remove jewelry, watches, and other metallic objects.
●
Do not operate the probe if any part is damaged, or with suspected fail-
ures. If you detect or suspect any damage to the probe, have it inspec-
ted by qualified service personnel.
1.5
Unpacking the Instrument
The following items are included in the delivery:
●
R&S
RT-ZD01 high voltage differential probe
●
Carrying case
Precautions
www.allice.de
Allice Messtechnik GmbH
