Commissioning
R&S
®
TS-PCA3
51
User Manual 1152.3908.12 ─ 19
4.5.6
Opening the Case
ELECTROCUTION HAZARD!
Before opening the case, the R&S TS-PCA3 must be powered off and isolated from
the power supply!
The case of the Test System Versatile Platform R&S TS-PCA3 should only be opened
by qualified engineers!
The ESD (electrostatic discharge) regulations must be complied with when opening the
case of the R&S TS-PCA3.
Figure 4-5: R&S TS-PCA3 Rear View
1 = Case body
2 = Rear case feet (4)
The case of the R&S TS-PCA3 must be opened for internal cabling purposes. To do
this, proceed as follows:
1. Disconnect all connections at the front and rear of the R&S TS-PCA3.
2. Unscrew the four feet at the back of the R&S TS-PCA3.
3. Set the R&S TS-PCA3 on its front handles and carefully pull down the case body
from the R&S TS-PCA3.
Cabling