Rohde & Schwarz 1152.2518.02, User Manual, Page: 41 / 91

Description
R&S
®
TS-PCA3
39 User Manual 1152.3908.12 ─ 19
In addition, with the jumpers on X40, the lines can be brought to the front-module R&S
TS-PMB in the slot 15, see
Chapter 8, "Interface Description" , on page 58.
The User CAN Controller can be operated via the RSCAN SW module.
3.4.6 Driver Software
The local microcontroller is triggered by the CAN1 bus and the R&S-specific protocol.
The following software modules are installed during R&S GTSL installation:
●
RSCAN
●
RSPSYS
The CAN2-bus can be used for the customer specific implementations with help of the
RSCAN functions.
3.4.7 Self-Test
The module R&S TS-PSYS1 has no built-in self-test capability. The function of the
internal CAN bus can be checked with the local CAN node.
3.5 Function Description
The functionality of the R&S TS-PCA3 depends essentially on the installed plug-in
modules and the related software. The R&S TS-PCA3 is basically suitable for all types
of production tests.
An adapter interface can be flange-mounted to the front of the R&S TS-PCA3 for the
rapid and high-pole adaption of test devices (see
Figure 3-4 )
3.6 Permitted Module Configuration
Because of the different properties of plug-in modules, there are restrictions on the use
of plug-in slots.
Figure 3-21 and Figure 3-22 shows an overview of which modules can be operated in
which plug-in slots.
Permitted Module Configuration