Rohde & Schwarz 1152.2518.02, User Manual, Page: 31 / 91

Description
R&S
®
TS-PCA3
29 User Manual 1152.3908.12 ─ 19
Slot Code
1 0001
2 -
3 0010
4 0011
5 0100
6 0101
7 0110
8 0111
9 1000
10 1001
11 1010
12 1011
13 1100
14 1101
15 1110
16 1111
Note:
0: Pin connected to GND via resistor
1: Pin open
3.3.6 CAN Bus
For controlling of some R&S modules, the CAN bus is used in TS-PCA3 and TS-
PWA3. The CAN bus numbering results from the following scheme:
CANu::v::w::x
u = Board Number
v = Controller Number
w = Device Number
x = Slot Number
Board Number and Controller Number are always 0. The Device Number of the frame
is determined by the settings of the jumpers on the backplane (see
Chapter 3.3.7,
"Configurations with several Frames or Option R&S TS-PXB2" , on page 30). For
Rear-I/O modules like R&S TS-PSYS1 and R&S TS-PSYS2, a 4 has to be added to
the Device Number.
Construction