Version 2.0
Copyright Roger™
-GPS
2019 10 01
10
Extending the number of repeaters by
adding an Amplifier/Splitter
ROGER™
GNSS Amplifier& Splitter(GNSS-AS)
ROGER™ G
NSS Amplifier & Splitter is a combined
signal splitter and line amplifier with an output of
+12dB (1 port) and +4 dB (2 ports) that can
transmit to up to three separate repeater units.
In order to get the amplification, the ports must
be connected as shown below. The unused ports
must be terminated with a 50ohm termination if
less than 3 repeaters are connected to GNSS-AS.
Extending the number of repeaters by
adding a Splitter 1 to 2
ROGER™
GNSS Splitter 1 to 2 (GNSS-S2)
With the ROGER™ G
NSS Signal Splitter 1 to 2, the
signal from one external antenna can be
redistributed to up to two repeater units.
It is advisable to use a separate amplifier with the
signal splitter to ensure adequate transmission
power to all the two repeaters. If the signal is to
be transmitted to only one repeater, the unused
port must be terminated with a 50ohm
termination. Splitter is powered through the
output signal cable by the
ROGER™
GNSS
Repeater and it passes on DC power for the GNSS
receiving antenna or GNSS line amplifier.
