background image

Version 2.0 

Copyright Roger™

-GPS 

2019 10 01 

 

 

 
 

 

Roger-GPS Ltd. 

 the Company 

 

The increasing dependence on GNSS 

 Global Navigation Satellite System (GPS, Glonass, Galileo, Beidou) 

and their applications has placed an additional demand on them having the capability of operating both 
indoors and outdoors without interruption to the data.  

ROGER™GPS Ltd. is a company that specializes in GNSS (GPS) repeating technology. The ROGER™

-GPS 

proven system concept enables the use of GNSS repeater devices to provide services in places where it was 
previously unavailable. We have a wide range of customers who always require reliable GNSS signal 
reception or time synchronization; they include telecommunications providers, Public Safety Services, 
Utilities, Defence, Transport, Airlines, Logistics and the companies who manufacture, sell and maintain 
GNSS systems, receivers, terminals and services.  

The Roger™

-GPS Ltd. business concept permits the use of GNSS repeater devices and services in places 

where it was not previously possible.  

In September 2008 Sparklike Ltd. launched the first CE-certified GPS repeater product family approved by 
the communications authorities in Finland and Sweden for use as radio-

licensed device. ROGER™

-GPS was 

established as spin-off in February 2009 to continue the development, manufacturing and marketing of GPS 
products started by Sparklike Ltd. 

The private company owners of Roger-GPS Ltd. are Maktub Consulting Ltd., and Naxim Ltd. 
 

 

 

 

 

 

 

 

  

 

 

 

 

CE CERTIFICATE, radio licensing 

The Roger™

-GPS L1 GPS repeater product was recertified in January 2012 

according to the renewed ETSI EN 302 645 V1.1.1 (2010-03) Harmonized 
European Standard. The equipment conforms to the essential requirements of 

Directive 2014/53/EU (hereafter “The Radio Equipment Directive”) and EN 301

 

489-1 (V1.8.1), EN 301 489-3 (V1.4.1), EN 302 645 (V1.1.1). 
 
Roger

-GPS products have been classified in NATO N-S-N code and NATO 

NCAGE code. 

 
This product can be put into service throughout the European Economic Area. 
Study this documentation of use and installation instruction provided in this 

manual and in your local country sales area of Roger™

-GPS LTD. The user must 

have the necessary frequency licence for operation in that area. 

Summary of Contents for GNSS-L1G1GA-EU













Reviews: