Roger Technology H85/DEC, Instruction And Warnings For The Installer

Page: 29 / 76

29 29
EN
20
Indicators
ERROR ALERT H85/TTD KEYPAD POSSIBLE CAUSE
LR LED blinks rapidly 5 times
Intermittent buzzer
Incorrect password
User coder not in memory
User code or password entered with fewer than 3 digits or more than 6
In code delete mode or change password mode: the codes entered do not
QEXGLXLIGSRƼVQEXMSRGSHIW
9WIVGSHIEPVIEH]WXSVIH
*EMPYVIXSIRXIVEJXIVXLIYWIVGSHI
(MKMXIRXIVIHMRGSVVIGXP]MRWXIEHSJ
,()'SRP]
Attempt to store a user code on the C or D function key
not supported by the interface
Alternately blinking LV and LR LEDs
9WIVGSHIIRXIVIHMRGSVVIGXP]XMQIWMREVS[
/I]TEHPSGOWJSVW
If multiple keypads are connected to the interface card: one of the keypads
MWXVERWQMXXMRKEGSQQERH
ERROR ALERT H85/DEC-H85/DEC2 POSSIBLE CAUSE
L1 LED blinking rapidly
2SJEYPX
L1 LED blinking slowly
/I]TEHGSQQYRMGEXMSRIVVSV
H85/DEC2 only : one of the two keypads is not functioning properly or is
HMWGSRRIGXIH
L2 LED not lit
(H85/DEC only)
2SEPEVQMHIRXMƼIH
L2 LED lit for 3 s
(H85/DEC only)
6ITIEXIH FYX RSX WIVMSYW IVVSV MR GSQQYRMGEXMRK [MXL OI]TEHW 'LIGO
XLEXGEFPIWEVIRSXVSYXIHGPSWIXSWSYVGIWSJMRXIVJIVIRGI
L2 LED remains on
(H85/DEC only)
System tamper alarm
%XXIQTXXSGSRRIGXEOI]TEHXLEXMWRSXVIGSKRM^IHF]XLIMRXIVJEGI
0MROGEFPIHMWGSRRIGXIHJSVQSVIXLERWJVSQEXPIEWXSRIOI]TEH
The ALRM
GSRXEGXMWSTIR
To reset the alarm, press the PROG key for 1 s, the L2 LED goes out and the
ALRM
GSRXEGXGPSWIW:IVMJ][LMGLOI]TEHXVMKKIVWXLIEPEVQEWHIWGVMFIH
MRXLITEVEKVETL*92'8-32(-%+2378-'7
If the error alerts persist, contact Technical Service.
21
Function diagnostics (only H85/DEC)
If there is an error alert (red L2
0)(PMXSVMRXIVQMXXIRXGLIGOXLIJYRGXMSRMRKSJXLIOI]TEHWEWWLS[RFIPS[
•
&VMIƽ]TVIWWXLI
PROG key on the H85/DEC
MRXIVJEGI8LIKVIIR
L1 and red L2
0)(WKSSYX
•
;MXLIEGLWYGGIWWMZITVIWWSJXLI
PROG
OI]XLIMRXIVJEGIZIVMƼIWXLIOI]TEHWMRWIUYIRGIJVSQXS
•
8LIOI]TEHFIMRKGLIGOIHMWMHIRXMƼIHF]XLIRYQFIVSJGSRWIGYXMZIFPMROWSJXLIKVIIR
L1 or red L2
0)(W
If the green L1
0)(FPMROWXLIOI]FSEVHMWJYRGXMSRMRKGSVVIGXP]
If the red L2 LED blinks, it means that:
–
the keypad does not work
–
the keypad is not stored in the interface;
– XLIOI]TEHMWGSRRIGXIHFYXXLIMRXIVJEGIHSIWRSXVIGSKRM^IMXWMHIRXMƼGEXMSRRYQFIV-(
•
3RGIXLIOI]TEHWLEZIFIIRGLIGOIHTVIWWXLI
PROG key to return to normal operation; the green L1 LED blinks
VETMHP]
22
Initial testing
•
3RTS[IVSRXLI
L1, L2, A, B, C, D LEDs on the H85/DEC interface ( L1, A, B on the H85/DEC2
MRXIVJEGIWLSYPH
PMKLXYTMRWIUYIRGI
• Check the outputs OUT_A, OUT_B, OUT_C, OUT_D are enabled (if connected, only OUT_C and OUT_D for H85/
DEC2
F]TVIWWMRKXLI
1/A, 4/B, 7/C, */D function keys after unlocking operation by entering one of the user codes
MRQIQSV]
• Check that, with the memorised keypads, the green L1 LED blinks rapidly and the red L2 LED remains off ( L2 only