Roger Technology B70/2B, Instruction And Warnings For The Installer

Page: 61 / 176

EN
61
Enable safeguarded door closure/opening
)REFPMRKXLMWTEVEQIXIVIRWYVIWXLEXXLIHSSVMWRSXPIJXSTIRHYIXSERMRGSVVIGXERHSVEGGMHIRXEP
command.
This function is NOT
IREFPIHMJ
• the door receives a STOP command;
• the sensing edge is activated;
• the door is completely open (due to parameters
$
and ).
•
XLIEGUYMVIHTSWMXMSRMWPSWXTIVJSVQTSWMXMSRVIGSZIV]WIIGLETXIV
Disabled. The parameter is not displayed.
Enabled.
(1)
After a period of time set with parameter
XLIGSRXVSPYRMXWMKREPWEWIGSRH[EVRMRK[MXLXLIƽEWL
MRKPMKLXVIKEVHPIWWSJXLITEVEQIXIV $ ERHXLIRGPSWIWXLIHSSV
Enabled.
(1)
-JXLIHSSVMWGPSWIHEWEVIWYPXSJEWXITQSHIGSQQERHEJXIVETIVMSHSJXMQIWIX[MXLTEVEQIXIV
XLIGSRXVSPYRMXWMKREPWEWIGSRH[EVRMRK[MXLXLIƽEWLMRKPMKLXVIKEVHPIWWSJXLITEVEQIXIV $ ERH
then the door closes.
-JXLIHSSVMWWXSTTIHF]XLISFWXEGPIHIXIGXMSRW]WXIQHYVMRKEGPSWYVIQERSIYZVIXLIHSSVGPSWIW
after a period of time set with parameter .
-JXLIHSSVMWWXSTTIHF]XLISFWXEGPIHIXIGXMSRW]WXIQHYVMRKERSTIRMRKQERSIYZVIXLIHSSVGPSWIW
after a period of time set with parameter .
(1)
-JXLIGSRXVSPYRMXHIXIGXWEGSPPMWMSRSGGYVVMRKMRXLIWEQITSWMXMSRGSRWIGYXMZIXMQIWXLIJYRGXMSRMWHMWEFPIHERHXLIQSXSVMWWIX
to safety mode. The door will then complete the manoeuvre only when a command is received.
-JXLIGSRXVSPYRMXHIXIGXWQSVIXLERGSPPMWMSRWHYVMRKSTIRMRKERHSVGPSWYVI[MXLMRERQMRYXITIVMSHXLIJYRGXMSRMWHMWEFPIHERH
the motor is set to safety mode. The door will then complete the manoeuvre only when a command is received.
Setting safeguarded closure/opening activation time
N.B.: this parameter is not visible if the value of parameter = .
Wait time settable from 2 to 90 s.
Wait time settable from 2 to 9 min.
Restoring factory default values
NOTE This procedure is only possible is NO data protection password is set.
P1
P2
x4 s
Warning! Restoring default settings cancels all settings made previously except for parameter
$ EJXIVVIWXSVI
check that all parameters are suitable for the installation.
The default factory settings may also be restored using the
S
(up arrow) and
T HS[REVVS[FYXXSRWEWJSPPS[W
• Turn off the power.
• Press and hold the
S
(up arrow) and
T
(down arrow) button until the unit switches on.
• The display flashes after 4 s
U(V
.
• The default factory settings have now been restored.
-HIRXMƼGEXMSRRYQFIV
8LIMHIRXMƼGEXMSRRYQFIVGSRWMWXWSJXLIZEPYIWSJXLITEVEQIXIVWJVSQ Q
to
Q
.
N.B.
8LIZEPYIWWLS[RMRXLIXEFPIEVIMRHMGEXMZISRP]
Q
HW version.
Example
Q
Year of manufacture.
Q
Week of manufacture.
Q
Serial number. Q
Q
Q
FW version.