Rodgers Trillium T797, Owner'S Manual

Page: 84 / 100

73
A MIDI Save may be performed to save this setting as the default. See “MIDI Save”
on page 75 for more information.
MIDI Device ID
MIDI Device ID is an identification number used in System Exclusive Stop Control
messages. This ID number can be used to allow independent control over multiple organ
consoles connected via MIDI or to facilitate storing multiple sets of registration information
on a sequencer recording.
Normally, the organ both sends and recognizes an ID number of 17; stop messages with other
ID numbers are ignored. When multiple consoles are controlled via MIDI, each can use a
different ID number, thereby allowing independent control of each console’s registration.
The number can be set to 1, or 17 through 32. Setting the ID to 1 produces Stop Control
messages that are compatible with older Rodgers PDI and C-Series organs.
In most cases, the ID will not need to be changed.
Setting MIDI Device ID
To select a different MIDI Device ID:
1. Press and release the QUICKMENU piston.
2. Rotate the Select knob to highlight
MIDI Settings
.
3. Press QUICKMENU to select the MIDI Settings category.
4. Rotate the Select knob to highlight
Device ID
.
5. Press QUICKMENU to select the Device ID category. The following screen
is displayed:
M I D I S e t t i n g s
D e v i c e I D 1 7
T o n e N a m e s G S
6. Rotate the Alpha dial to select a new Device ID number.
7. Press General Cancel (‘ 0 ’) to exit.
Instead of saving, you may press and hold General Cancel (‘ 0 ’) and momentarily press
SET to return MIDI couplers to their defaults. This Reset procedure also returns
Voice Palette selections to their defaults.
!
The Device ID reverts to a value of 17 when the instrument is powered off.
!