Rodgers Trillium T797, Owner'S Manual

Page: 57 / 100

46
5. Rotate the Select knob to highlight
Headphone Aud
.
6. Press the QUICKMENU piston to select the Headphone Audio category. The
following screen is displayed:
A u d i o C o n t r o l s
H e a d p h o n e s
0. 0 0
V O L U M E
7. Rotate the Alpha dial to select the setting to be adjusted (
VOLUME
,
BALANCE
,
BASS
,
TREBLE
).
8. Rotate the Select knob to advance to the next field ( 0.00 in the example above).
9. Rotate the Alpha dial to change the value of the selected parameter.
Auxiliary Controls
The Rodgers T797 is equipped with stereo auxiliary input jacks (one for the left channel and one
for the right channel) located on the connector panel under the keydesk to the right. When using
these input jacks, audio signals from other sound generating devices like synthesizers, MIDI
sound modules, and tape players are mixed into the organ’s main audio system. A series of
menus in the Audio Controls category are used to adjust the characteristics of the auxiliary
inputs.
Adjusting Auxiliary Inputs
To adjust the settings for the Auxiliary Inputs:
1. Press the QUICKMENU piston.
2. Rotate the Select knob to highlight
Audio Controls
.
All four parameters can be adjusted, if desired, without exiting the display. Simply
use the Select knob to move between fields and the Alpha dial to change the field.
In addition to settings for the main speaker system, Dimensional Sound Modeling has
separate parameters for when headphones are inserted into the instrument. This
allows you to select a different reverb when using headphones.
!
Public address systems should NOT be connected through the organ’s audio system.
!