Rodgers Trillium T797, Owner'S Manual

Page: 66 / 100

55
The Great A MIDI coupler normally sends on MIDI channel 1, however, it can be set to send
on any of the 16 available MIDI channels. All of the channels for other couplers are fixed.
Following are the MIDI coupler pistons and their MIDI channels:
Division Coupler MIDI Channel
MIDI GT A Channel 1* Great
MIDI GT B Channel 5
MIDI SW A Channel 2 Swell
MIDI SW B Channel 6
MIDI PED A Channel 3 Pedal
MIDI PED B Channel 7
* May be changed to any of the sixteen MIDI channels.
Changing the Great MIDI Channel
Generally, you won’t need to reassign the Great A MIDI coupler channel to use most
MIDI sound modules. However, there will be times when it is necessary or desirable to
send MIDI information on a channel other than those listed above.
Common applications for changing the Great A MIDI coupler channel include the
creation of multi-track sequences and accessing sounds in a module which receives on a
channel other than those listed above.
To change the Great A MIDI coupler channel:
1. Hold the SET piston and press MIDI GT A . The coupler piston will flash.
2. Rotate the Select knob to highlight the MIDI channel field:
M I D I C o u p l e r G T A
C h a n n e l
O c t a v e
V e l o c i t y
1
N O R M
6 4
3. Rotate the Alpha dial to select the new MIDI channel (1 – 16).
4. Press either the flashing MIDI coupler piston or General Cancel (‘ 0 ’) to exit.