manualshive.com logo in svg

Rodgers MR-200, Owner'S Manual

The Rodgers MR-200 Owner's Manual is an essential guide to maximize your product experience. Easily download the comprehensive manual for free from our website. This user-friendly manual empowers you to explore all features and functionalities of the Rodgers MR-200, ensuring optimal performance and satisfaction.

Share
Download
background image

MR-200 – Owner’s Manual

5

014

• Protect the unit from strong impact.

(Do not drop it!)

.............................................................................................................................................

015

• Do not force the MR-200’s adapter to 

share an outlet with an unreasonable 
number of other devices. Be especially 
careful when using extension cords—the 
total power used by all devices you have 
connected to the extension cord’s outlet 
must never exceed the power rating 
(watts/amperes) for the extension cord. 
Excessive loads can cause the insulation 
on the cord to heat up and eventually 
melt through.

.............................................................................................................................................

016

• Before using the unit in a foreign coun-

try, consult with your retailer, the nearest 
Roland Service Center, or an authorized 
Roland distributor, as listed on the 
“Information” page.

.............................................................................................................................................

101a

• The unit should be located so that its 

location or position does not interfere 
with its proper ventilation.

.............................................................................................................................................

102b

• Always grasp only the plug on the adapter 

cord when plugging into, or unplugging 
from, an outlet or this unit.

.............................................................................................................................................

104

• Try to prevent cords and cables from 

becoming entangled. Also, all cords and 
cables should be placed so they are out of 
the reach of children.

.............................................................................................................................................

106

• Never climb on top of, nor place heavy 

objects on the unit.

.............................................................................................................................................

107b

• Never handle the adapter’s power cord or 

its plugs with wet hands when plugging 
into, or unplugging from, an outlet or 
this unit.

.............................................................................................................................................

• If you need to move the instrument, take 

note of the precautions listed below. It 
should be handled carefully, all the while 
keeping it level. Make sure to have a firm 
grip, to protect yourself from injury and 
the instrument from damage.

2

• Disconnect the adapter cord.

3

• Disconnect all cords coming from 

external devices.

.............................................................................................................................................

• Before cleaning the unit, turn off the 

power and unplug the adapter from the 
outlet.

.............................................................................................................................................

• Whenever you suspect the possibility of 

lightning in your area, pull the plug on 
the power cord out of the outlet.

.............................................................................................................................................

117

• Should you remove screws, be sure to put 

them in a safe place out of children’s 
reach, so there is no chance of them being 
swallowed accidentally.

.............................................................................................................................................

Summary of Contents for MR-200













































Reviews:

No comments

Related manuals for MR-200

Panasonic HF Series Quick Start Manual preview
HF Series
Brand: Panasonic Pages: 9
Xoop Lighting B150 User Manual preview
B150
Brand: Xoop Lighting Pages: 20
Vari Lite VL550 Service Manual preview
VL550
Brand: Vari Lite Pages: 132
Haigh Quattro Operating & Maintenance Manual preview
Quattro
Brand: Haigh Pages: 60
Parkside PFMR 1600 A1 Operation And Safety Notes preview
PFMR 1600 A1
Brand: Parkside Pages: 95
Balanced Body Konnector Installing preview
Konnector
Brand: Balanced Body Pages: 4
Balanced Body Arm Chair Assembling preview
Arm Chair
Brand: Balanced Body Pages: 2
Balanced Body Reformer Trapeze Combination Manual preview
Reformer Trapeze Combination
Brand: Balanced Body Pages: 164
Wacker Neuson VP Operator'S Manual preview
VP
Brand: Wacker Neuson Pages: 50
Balanced Body CoreAlign Assembly And Use preview
CoreAlign
Brand: Balanced Body Pages: 37
Zimmer GED5000IL Series Installation And Operating Instructions Manual preview
GED5000IL Series
Brand: Zimmer Pages: 52
Eleiko PRESTERA J-CUP Manual preview
PRESTERA J-CUP
Brand: Eleiko Pages: 4
Heiniger EVO/H Translation Of The Original Instructions preview
EVO/H
Brand: Heiniger Pages: 164
Hausmann 6058 Installation & Operation Instructions preview
6058
Brand: Hausmann Pages: 10
Biosonic Suvi Elite Quick Start Manual preview
Suvi Elite
Brand: Biosonic Pages: 2
Petzl NAVAHO BOD Instructions For Use Manual preview
NAVAHO BOD
Brand: Petzl Pages: 7
SHOWTEC RGB Studio Beam Driver Product Manual preview
RGB Studio Beam Driver
Brand: SHOWTEC Pages: 16
Raymarine ST7001+ Quick Reference Manual preview
ST7001+
Brand: Raymarine Pages: 3

Brands by name

Popular brands

Load more brands