Rodgers MR-200 Owner'S Manual Download Page 3 | Manualshive

Page: 3 / 44

background image

MR-200 – Owner’s Manual

3

FCC notice

Radio and Television Interference

Notice to users

Rodgers products use and generate small amounts of radio-frequency (RF) energy. The instru-
ment complies with the limits set for Class B computing devices. FCC Rules, Part 15, Subpart J
define the limits for radio and television interference in a residential installation.
Follow the installation and the use instruction in the manual, or the instrument could potentially
cause interference with some radio or television reception. In the unlikely event this occurs, we
encourage the user to try the following corrective measures:
• Turn the instrument OFF to see if it is the actual source of the interference.
• Disconnect the peripheral devices and their input/output cables one at a time. If the interfer-

ence stops, it is caused by the peripheral device or its I/O cable.

• Try coiling and uncoiling the instrument’s power cord in different ways.
• Connect the instrument’s power cord to a power outlet on a different circuit.
• Move the instrument further away from the radio or television receiver.
• Turn the radio or television receiver until the interference stops.
• Connect the radio or television receiver to a different power circuit.
• Reorient or move the receiver antenna further away from the instrument. Consider installing a

rooftop antenna with coaxial cable lead-in between the antenna and receiver.

• Consult the nearest Rodgers dealer for more information if the above corrective measures don’t

remove the interference.

Information in this document is subject to change without notice. No part of this manual may be
translated into any language, stored in a retrieval system, reproduced or transmitted in any form
or by any means, electronic or mechanical, including photocopying and recording, for any pur-
pose without the express written permission of

Rodgers Instruments LLC.

RODGERS INSTRUMENTS LLC

1300 N.E. 25

th

Avenue

Hillsboro, Oregon 97124

USA

(503) 648-4181

www.rodgersinstruments.com

RODGERS IN CANADA

5480 Parkwood Way

Richmond, B.C. V6V 2M4

(604) 270-6332

© Copyright 2003. Rodgers Instruments LLC, a member of the Roland Group. All rights reserved.

Rodgers®, Rodgers Classic Organs®, and Insignia™ are trademarks or registered trademarks of Rodgers Instruments LLC,

Hillsboro, Oregon.

«
1
2
3
4
5
...
»

Summary of Contents for MR-200













































Reviews:

No comments

Related manuals for MR-200

Brand: XTA Pages: 29

Brand: vc999 Pages: 59

Brand: Qtx Pages: 3

Brand: Saferoad Pages: 24

WJHD309A - DIGITAL DISK RECORDER

Brand: Panasonic Pages: 79

Brand: Fisher Scientific Pages: 42

Brand: AccuMed Pages: 14

Brand: TAS Pages: 25

Brand: B&G Pages: 3

Brand: Raymarine Pages: 3

SmartPilot ST8002

Brand: Raymarine Pages: 48

Brand: Raymarine Pages: 38

hsb2 PLUS Series

Brand: Raymarine Pages: 248

Saturn 2000 GC/MS

Brand: Varian Pages: 9

Brand: Yamaha Pages: 31

Brand: Goobay Pages: 6

Brand: ProLights Pages: 28

EPL-HB-150LED-RT-IBSC

Brand: Larson Electronics Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands