Rodgers MR-200 Owner'S Manual Download Page 31

Page: 31 / 44

MR-200 – Owner’s Manual

Press the

[VALUE]

knob (“PUSH”) when the

desired additional track is displayed.

The “

„

” symbol means that the selected

track contains data. They will be replaced if
you change this symbol to “

”. Tracks that

do not contain data have no symbol.

On the external MIDI instrument, select
the MIDI transmit channel (probably
called “TX”) that corresponds to the
selected track.

Press the

[SOUND¥SELECT]

button.

The display now responds with:

You can also select this function by pressing
and holding the

[TRACK]

button. The display

then looks as follows (see also page 29):

Select the track you wish to assign a sound
to and proceed with step

If the “

All

” recording mode is selected, the

nitial assignment applies to track 01 (see
“<1>” above) . This can be changed, how-
ever. You can only select a sound for one
track at a time.

Press the

[TRACK]

button and use the

[VALUE]

knob to select the track you wish to

assign a sound to (“16” in the following
example).

If you selected this page via the “Track
Detect” function, this step may be unneces-
sary.

Press the

[SONG]

button and use the

[VALUE]

knob to select a category (“PresetA” in the
example above).

Press the

[BEAT]

[TEMPO]

button and use

the

[VALUE]

knob to select a sound (“066” or

“D-50 Heaven”).

If necessary, return to step

and select a

different track.

Press PAGE

[®]

to go to the next page:

This page contains the “translated version”
of the sound address you may have selected
in step

. Use this page when you are work-

ing with other instruments than an
MX-200.

Use

[SONG]

(MSB),

[BEAT]

(LSB) and

[TEMPO]

(PC) to select the parameter you

want to change.

If necessary, press the

[TRACK]

button and

use the

[VALUE]

knob to select a different

track.

Use the

[VALUE]

knob to set the desired

value.

The settings you make while the

[SOUND¥SELECT]

button lights are usually immediately adopted by
the connected sound module, etc.

Off

<1>2/7

---:No Patch

Track Detect 1/7

Tr Tr Tr

PresetA

<16>2/7

066:DynaMarimba

MSB= 87

<16>3/7

LSB= 81 PC= 66

Summary of Contents for MR-200













































Search results

Summary of Contents for MR-200

Reviews:

Related manuals for MR-200

Brands by name

Popular brands

Rodgers MR-200, Owner'S Manual

Search results

Summary of Contents for MR-200

Reviews:

Related manuals for MR-200

Brands by name

Popular brands