Song Player/Recorder
32
Q
Use PAGE
[√][®]
to select the other parame-
ters that are available here.
The other parameters are:
R
Press
[BEAT]
or
[TEMPO]
to select the param-
eter and use the
[VALUE]
knob to set the
desired value.
S
Press the
[VALUE]
knob to select “Off ” (or to
return to the value you set).
If necessary, press the
[TRACK]
button and
use the
[VALUE]
knob to select a different
track.
You can also change the
[SOUND¥SELECT]
parameters without pressing the
[REC≈∏]
but-
ton first. But that only applies to playback.
The settings you make here are recorded at the
beginning of the track. If you like, you can change
them again (on your external instrument) while
recording to change the volume, pan, etc., as the
song evolves.
Volume, PanPot, Reverb and Chorus are only
transmitted if you also specify a program change
number.
[SOUND¥SELECT]
is only available while the
MR-200 is stopped.
T
If you switched on the
[METRONOME]
but-
ton, set the time signature and tempo:
• Press
[BEAT]
below the display and use the
[VALUE]
knob to set the time signature (1/4,
2/4, 3/4, 4/4, 5/4, 6/4, 6/8, 9/8).
• Press
[TEMPO]
below the display and use the
[VALUE]
knob to set the tempo (20~250).
Watch the BEAT indicator while setting
these two values and listen to the metro-
nome. If necessary, change the setting of the
[LEVEL]
knob on the MR-200’s rear panel.
The BEAT value can only be set before you start
recording a new song (and only in “All” mode). The
TEMPO value can be changed while recording the
first part or by programming the Tempo Track later
(see page 27).
U
Press the
[PLAY¥®]
button.
If the metronome is already ticking, it will
restart when you press the
[PLAY¥®]
button.
If the metronome is off, you will neverthe-
less hear a 2-measure count-in (unless you
switch that function off, see page 23).
V
Wait until the count-in is finished and the
[PLAY]
button lights, then start playing your
part(s).
Do not play any notes while the count-in is still
running.
If you like (and if you only play with one
hand), you can change the tempo during
recording by first pressing
[TEMPO]
and then
using the
[VALUE]
knob. All changes per-
formed in this way are recorded.
Volume
“Off ”*,
0~127
(CC07) Specifies the volume of
the part that receives on this
MIDI channel.
Pan
“Off ”*,
L64~0~
R63
(CC10) Stereo position of the
track (and corresponding MIDI
channel). “L64” correspond to
hard left, “0” to the center, and
“R63” to hard right.
Reverb
“Off ”*,
0~127
(CC91) Reverb Send value of the
track (and corresponding MIDI
channel). This indicates how
much Reverb should be added to
the part.
Chorus
“Off ”*,
0~127
(CC93) Chorus Send value of the
track (and corresponding MIDI
channel). This indicates how
much Chorus should be added to
the part.
Volume
<16>4/7
110