User guide
MD PBX KEY CW
Issue 1.00
Page 12
How to programm the access
codes for contact one
1) Using a telephone with a DTMF dial pad
call
the doorstation using the
internal
telephone number
of the extension line
where the MD PBX KEV CW is connected to
2) The MD PBX KEY CW doortstation will
answer the call automatically. After the
answer you will hear
a long
acknowledge
tone
3)
Within 6 seconds
dial now the
programming code
* # 4
4) You will hear
a short acknowledge tone
5)
Dial
now
* [access code for contact one (
3- to 6 digits long)] * [access code
number (1 to 0)]
6) You will hear
a short acknowledge tone
7) Repeat the step 5 until all access codes are
programmed
8)
Dial
now
* *
9) You will hear
a long acknowledge tone
10)
Dial
now the code
#
, you will hear
a long
acknowledge tone
and then the MD PBX
KEX CW will
hang up
or
11)
Dial
the programming code for
another
programming function
Please note:
- Up to 10 different access code can be
programmed for the contact one
- The codes for the contact one and two are to
be different!
How to delete the access
codes for contact one
1) Using a telephone with a DTMF dial pad
call
the doorstation using the
internal
telephone number
of the extension line
where the MD PBX KEV CW is connected to
2) The MD PBX KEY CW doortstation will
answer the call automatically. After the
answer you will hear
a long
acknowledge
tone
3)
Within 6 seconds
dial now the
programming code
* # 4
4) You will hear
a short acknowledge tone
5)
Dial
now
#* [access code number (1 to 0)]
6) You will hear
a short acknowledge tone
7) Repeat the step 5 if more access codes are
to be deleted
8)
Dial
now
* *
9) You will hear
a long acknowledge tone
10)
Dial
now the code
#
, you will hear
a long
acknowledge tone
and then the MD PBX
KEX CW will
hang up
or
11)
Dial
the programming code for
another
programming function
Please note:
- If all access codes are deleted or no one was
programmed, we suggest to disconnect
the "access code" functional button as the
keypad might be blocked in this case
