User guide
MD PBX KEY CW
Issue 1.00
Page 15
How to programm the
activation time for contact
two
1) Using a telephone with a DTMF dial pad
call
the doorstation using the
internal
telephone number
of the extension line
where the MD PBX KEV CW is connected to
2) The MD PBX KEY CW doortstation will
answer the call automatically. After the
answer you will hear
a long
acknowledge
tone
3)
Within 6 seconds
dial now the
programming code
* # 7
4) You will hear
a short acknowledge tone
5)
Dial
now
# [activation time for contact
one in seconds (01 to 99)]#
6) You will hear
a short acknowledge tone
7)
Dial
now
* *
8) You will hear
a long acknowledge tone
9)
Dial
now the code
#
, you will hear
a long
acknowledge tone
and then the MD PBX
KEX CW will
hang up
or
10)
Dial
the programming code for
another
programming function
Please note:
- The contact one will be activated for the
programmed time after DTMF dial from
called party or access code input
- The default value is "05" for 30 seconds time
for access code input
- If you programm the value 00 the contact
two will be in ON/OFF mode. In this case
every activation will switch the contact
status. This will be keeped until the next
comand input
- The contact two is an optional feature!
