Rocom MD PBX KEY CW AV, User Manual

Page: 13 / 24

User guide MD PBX KEY CW Issue 1.00
Page 13
How to programm the access
codes for contact two
1) Using a telephone with a DTMF dial pad
call the doorstation using the internal
telephone number of the extension line
where the MD PBX KEV CW is connected to
2) The MD PBX KEY CW doortstation will
answer the call automatically. After the
answer you will hear a long acknowledge
tone
3) Within 6 seconds dial now the
programming code * # 5
4) You will hear a short acknowledge tone
5) Dial now * [access code for contact one (
3- to 6 digits long)] * [access code
number (1 to 0)]
6) You will hear a short acknowledge tone
7) Repeat the step 5 until all access codes are
programmed
8) Dial now * *
9) You will hear a long acknowledge tone
10) Dial now the code # , you will hear a long
acknowledge tone and then the MD PBX
KEX CW will hang up
or
11) Dial the programming code for another
programming function
Please note:
- Up to 10 different access code can be
programmed for the contact one
- The codes for the contact one and two are to
be different!
- The second contact is an optional feature!
- If the value of 999999 is programmed as
access code 1, the contact two will be
automatically activated for the
programmed activation time every time the
line is sized
How to delete the access
codes for contact two
1) Using a telephone with a DTMF dial pad
call the doorstation using the internal
telephone number of the extension line
where the MD PBX KEV CW is connected to
2) The MD PBX KEY CW doortstation will
answer the call automatically. After the
answer you will hear a long acknowledge
tone
3) Within 6 seconds dial now the
programming code * # 5
4) You will hear a short acknowledge tone
5) Dial now #* [access code number (1 to 0)]
6) You will hear a short acknowledge tone
7) Repeat the step 5 if more access codes are
to be deleted
8) Dial now * *
9) You will hear a long acknowledge tone
10) Dial now the code # , you will hear a long
acknowledge tone and then the MD PBX
KEX CW will hang up
or
11) Dial the programming code for another
programming function
Please note:
- If all access codes are deleted or no one was
programmed, we suggest to disconnect
the "access code" functional button as the
keypad might be blocked in this case