![background image](http://html1.mh-extra.com/html/rocom/md-pbx-key-cw-av/md-pbx-key-cw-av_user-manual_1476235019.webp)
User guide
MD PBX KEY CW
Issue 1.00
Page 19
Access code
- The visitor presses the function button
access code
- The
red LED
on the doorstation will switch
on, the line is seized. Now the visitor
should dial a valid access code on the
keypad
- If an error occurs the access code input
can be
interrupted
by pressing the
buttons
A (*)
or
B(#)
- If a wrong access code is inserted the
line will be dropped and seized again.
Please note!
With every wrong access
code input the
pause
between the line
interruption and new seizure will be
longer,
up to 45 seconds
. Only the
input of a correct code will reset this
status
- After the complete dial of the acces code
terminate the input pressing the
B(#)
button
, after this the contact one or
two will be activated depending from
the dialed access code