User guide
Doortello Business
Issue 1.00
Page 28
Maximum line seizure time
The Doortello Business speakerphone has a timer to control the maximum line
seizure time. This timer is activated a soon as the line is seized and will terminate the
connection when the programmed time is counted down. As default this timer is set
to 60 s. This can be changed or deactivated. To modify the maximum line seizure
time please follow this procedure:
OK tone
{max. seizure time in s
} OK tone
Driver contacts activation codes
The two driver contact can be activated with the DTMF digits
and
during a
conversation. This two codes can be changed if needed. To change a driver contact
activation code follow this procedure:
OK tone
{activation code}
{driver contact no.}
OK
tone
As activation code the values from
to
can be
programmed. If you program the value
the driver contact will be deactivated.
As driver contact no. the value
(driver contact 1) and
(driver
contact 2) can be used.
Example:
You want to program that the driver contact 2 should be activated using the
code "702". Input:
OK tone
OK tone
Please note!
The device will verify if the code you are programming is not already used. If
you will get a
NOOK
tone after the new code input, this may be already used.
You have then to use another code. Only code starting with the digits
,
and
can be used. If you are using codes with only one digit no other
code with more digits can be programmed using the same starting digit (i.e.
you can use "71" and "72", but not "7" and "71"). If you want to program a new
code as described in the example you have then first to delete the existing
code "7" for the driver contact 1, or modify it to another value (i.e. "701").
